Faronics Deep Freeze Standard 8.60.020.5592
| File Size: 11 MB
Password : karanpc

This is easy to use tool that helps you record your game activity or capture screenshots that you can later share with anyone.

Bandicam Download consists of 2 modes. One is the ‘DirectX/OpenGL window’ mode, which can be used to record the target created in DirectX (or OpenGL), and the other is the ‘Rectangle on a screen’ mode, which can be used for recording a certain area on the PC screen.

Bandicam displays FPS numbers in the corner of the screen while it is active in the ‘DirectX/OpenGL window’ mode. The FPS numbers do not display when it is recorded in the ‘Rectangle on a screen’ mode. Bandicam supports various video codecs (MPEG-1, Motion JPEG, Xvid, YV12, and RGB24) and audio codecs (MPEG-1 L2 and PCM).

Features
💎 Bandicam can record DirectX/OpenGL programs
💎 Bandicam compresses the video when recording
💎 You can upload the recorded file to YouTube without converting (720p/1080p full HD video can be made)
💎 You can record video at resolutions of up to 2560×1600 in high quality
💎 You will experience less lag while recording

Title: Bandisoft Bandicam v4.5.5.1632
Developer: Bandisoft
License: Shareware
Language: Multilingual
OS: Windows

"You educate a man; you educate a man. You educate a woman; you educate a generation." -Brigham Young #GoDigital MOHANUREDRIS.COM
#womansday #march8 #womenempowerment #womanownedbusiness #woman #design #websitedesign #design #graphicdesign #business #ideasmatter

The 1st case of #COVID19 in #Ethiopia 🇪🇹 has been confirmed. Let’s step up & maintain precautionary measures. NOW IS THE TIME. Frequent hand washing is key!

~ #MOH, FDRE

‼️‼️Essential book on CoVid19
Read it very carefully as it might save your life!!!!

‼️More than 126,000 confirmed cases
‼️More than 4,600 deaths

⚠️SHARE THIS WITH FAMILY AND FRIENDS!!!

Very Helpful! These are the symptoms of #coronavirus vs cold and flu, read and give awareness
#CoronavirusOutbreak #CoronaVirusUpdate #Corona #CoronaVirusethiopia #COVID #COVID2019 #COVID19 #Covid_19 #virus

Should you connect to your router via Wi-Fi or wired Ethernet?
#dailytips #internet
First of all, is the computer in question sitting near the router or is it located in another room in the house? If it’s located within 10 feet of the router, a wired connection offers a number of benefits. As far as connection speed is concerned, unless you are blessed with Fiber to the home both Wi-Fi and Ethernet are likely to be faster than the connection to your ISP so speed shouldn’t really be a factor in your decision.

In almost all cases I would go with a wired connection if there is only a short distance between the computer and router because Wi-Fi signals fluctuate and even go out entirely at times. A wired connection will be rock solid virtually all the time.

If the computer is farther than 10 feet way from the router or if running an Ethernet cable will be problematic, then opt for Wi-Fi. For the sake of convenience, it’s probably best  just to use Wi-Fi to connect a laptop even when using it near the router.

How can I use two Internet connections with the same office network?

there are several ways to use two Internet connections with one network, but the one I recommend in your situation is setting up your network with a dual-WAN router.

A dual-WAN router will allow you to connect two high-speed Internet connections to a single router to create a single Wi-Fi and/or wired network.

The two Internet connections can operate in one of two modes:

1 – Failover Mode – If you set the router to use this mode you would designate the Xfinity connection to be the primary (Active) connection and the Verizon connection to be the backup (Passive) connection.

As long as the Xfinity connection is online and working all of your network’s data will be transmitted over that connection. Nothing will be transmitted over the Verizon connection at all.

If something causes the Xfinity connection to go down the router will detect the lost connection and immediately and seamlessly switch the network over to the Verizon connection...

#continued 👆👆
Once the Xfinity connection comes back online the router will switch back to that connection.

2 – Load Balancing Mode – If you set the router to use this mode both Internet connections will be used at the same time, splitting the traffic between the two connections.

Load balancing is great for times when your network bandwidth is being maxed out because the total amount of Internet traffic will be split between the two connections.

Which mode you choose will be up to you, but I would recommend going with Load Balancing to take advantage of the extra total bandwidth that comes from the simultaneous use of two separate Internet connections.

Load Balancing actually gives you the best of both worlds…

While both Internet connections are active your Internet traffic will be split between the two connections.

However, if one of the connections goes down, the other connection will keep on working without skipping a beat!

There are quite a few dual-WAN routers on the market and they vary greatly in both quality and price.

If you’re looking for a recommendation I think you should take a look at this awesome dual-WAN router from Synology.

This is a super-fast router that has several other advantages in addition to supporting two Internet connections.

For example, it will allow you to block certain websites to prevent employees from using social media or other time-wasting sites while they are supposed to be working.

Also, if you use this router in Load Balancing mode your total effective Internet bandwidth can be as high as 2Gbps (depending on the max speeds of your two Internet connections).

Each invited friend who start to use the bot will give you 5 🍪 (+5 followers and >5 likes). Send it to a large Telegram chat and start to get free likes and followers!
Your referral link:

https://www.tgoop.com/likefollowbot?start=449817044

What Information Is Valuable to an Attacker?

To a skilled hacker, almost any data can be important when it comes to preparing an attack. When we think of SQL from this perspective, a lot of times our minds go right to SQL injection, but gathering information about the database itself can sometimes be just as important.



Things to look for when enumerating a database include the version, as sometimes a successful attack can be as easy as finding an exploit for an outdated version. Other things to look for are valid credentials, which can not only be used for the database, but often can be used for other applications or systems (password reuse is a real thing, and a real problem for organizations). Lastly, information about the structure of the database can be extremely useful for performing SQL injection since knowing what's there is often half the battle.
Today, we will be using Metasploit to enumerate some of this information on a MySQL database. We'll be attacking Metasploitable 2 via our Kali Linux box.

⛔️⛔️🎦NETFLIX🎦⛔️⛔️

Hello everyone, any one who wants cracked Netflix app or Netflix ACCOUNT with good price.

Contact me

@hamoo_d

I'm on Instagram as @ahmedjemal_. Install the app to follow my photos and videos. https://www.instagram.com/invites/contact/?i=2qftsc7dok5d&utm_content=56ypqo9