tgoop.com/switch_stuff/386
Last Update:
Switch not being found on any device
Before the mods remove my post just hear me out. This has turned into more than just a simple question. I have spent hours upon hours searching the internet for a resolution to this problem and after seeing other posts online that have gone unanswered with the same suggestions made over and over, I would really like to post this here and see if any bigger names in the scene or anyone at all knows what is happening and really get this issue figured out for any beginner that may purchase an unpatched switch and experience this same problem.Here is the issue:I am unable to get any device to recognize my switch being in RCM mode. This includes muliple windows PCs, a Macbook, an iPhone, and a samsung phone. I bought this unpatched switch on ebay and I have triple checked the serial number. It is not patched. Here is a check list of the basic troubleshooting steps recommended to me and others having the same issue.-Again, I made sure my switch is not patched.-I made sure that I am entering RCM mode properly. When I successfully enter RCM mode, my switch does not turn on with a single button press nor does it turn on when I plug the cable in like it does when the switch is powered off and not in RCM. I also made sure my switch is charged up.-I checked the cables I am using and have used three cables so far that all work for data transfer with a smartphone. Mind you, I have used these same cables and devices on other Switch devices with no issue ( the only thing I have yet to try is a dongle injector but I don't see the need to since these same methods worked on my previous switch.) I even went as far as jailbreaking an iPhone, buying a lightning OTG adapter and installing nxboot and it still does not work.-On windows I made sure all required drivers are installed and even tried using Zadig to install the proper drivers. Oddly enough, the Switch does not show up as
BY Switch 资源
Share with your friend now:
tgoop.com/switch_stuff/386